Dimensions - d (inside diameter) | 90mm |
---|---|
Dimensions - D (outside diameter) | 190mm |
Dimensions - B (width) | 43mm |
SKF NJ Design metric single row cylindrical roller bearing with polyamide cage and C4 clearance
SKF Single row cylindrical roller bearing, NJ design
SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Locate the shaft axially in one direction
Separable design
Dimensions
d 90 mm Bore diameter
D 190 mm Outside diameter
B 43 mm Width
d1 124 mm Shoulder diameter of inner ring
D1 160.3 mm Shoulder diameter of outer ring
F 113.5 mm Raceway diameter of inner ring
r1,2 min. 3 mm Chamfer dimension
r3,4 min. 3 mm Chamfer dimension
s max. 2.5 mm Permissible axial displacement
Abutment dimensions
da min. 104 mm Diameter of spacer sleeve
da max. 110 mm Diameter of spacer sleeve
db min. 127 mm Diameter of shaft abutment
Da max. 175.3 mm Diameter of housing abutment
ra max. 2.5 mm Radius of fillet
Calculation data
Basic dynamic load rating C 365 kN
Basic static load rating C0 360 kN
Fatigue load limit Pu 43 kN
Reference speed 3 800 r/min
Limiting speed 4 500 r/min
Minimum load factor kr 0.15
Limiting value e 0.2
Calculation factor Y 0.6
Mass
Mass 5.47 kg
Properties
Bearing part Complete bearing
Axial displacement capability In one direction
Number of rows 1
Locating feature, bearing outer ring None
Bore type Cylindrical
Cage Non-metallic
Number of flanges, outer ring 2
Number of flanges, inner ring 1
Loose flange None
Radial internal clearance C4
Coating Without
Sealing Without
Lubricant None
Relubrication feature Without