Dimensions - d (inside diameter) | 51.8mm |
---|---|
Dimensions - B (width) | 2mm |
External circlip shaft size 56mm thickness 2mm
Circlips are a cost saving alternative to fastening. Such as machined collars on shafts or washer and pin assemblies, still offering the same benefits of a single fastening mechanism by reducing material waste and the number of components.
Circlip & Groove dimensions
Nominal diameter d1: 56
Thickness s: 2.00
Thickness tolerance: - 0.07
Unstressed diameter d3: 50.8
Lug a: 7.2
Beam b: 6.4
Lug hole d5: 2.5
Groove diameter: 11.400
Groove tolerance: 52.0
Minimum groove width: - 0.30
Radial depth: 2.15
Shoulder length n: 1.50