Dimensions - d (inside diameter) | 47.8mm |
---|---|
Dimensions - B (width) | 2mm |
External circlip shaft size 52mm thickness 2mm
Circlips are a cost saving alternative to fastening. Such as machined collars on shafts or washer and pin assemblies, still offering the same benefits of a single fastening mechanism by reducing material waste and the number of components.
Circlip & Groove dimensions
Nominal diameter d1: 52
Thickness s: 2.00
Thickness tolerance: - 0.07
Unstressed diameter d3: 47.8
Lug a: 7.0
Beam b: 5.2
Lug hole d5: 2.5
Groove diameter: 11.100
Groove tolerance: 49.0
Minimum groove width: - 0.25
Radial depth: 2.15
Shoulder length n: 1.50