Dimensions - d (inside diameter) | 43.5mm |
---|---|
Dimensions - B (width) | 1.75mm |
External circlip shaft size 47mm 1.75mm
Circlips are a cost saving alternative to fastening. Such as machined collars on shafts or washer and pin assemblies, still offering the same benefits of a single fastening mechanism by reducing material waste and the number of components.
Circlip & Groove dimensions
Nominal diameter d1: 47
Thickness s: 1.75
Thickness tolerance: - 0.06
Unstressed diameter d3: 43.5
Lug a: 6.8
Beam b: 4.9
Lug hole d5: 2.5
Groove diameter: 7.500
Groove tolerance: 44.5
Minimum groove width: - 0.25
Radial depth: 1.85
Shoulder length n: 1.25