Dimensions - d (inside diameter) | 31.5mm |
---|---|
Dimensions - B (width) | 1.5mm |
External circlip shaft size 34mm thickness 1.5mm
Circlips are a cost saving alternative to fastening. Such as machined collars on shafts or washer and pin assemblies, still offering the same benefits of a single fastening mechanism by reducing material waste and the number of components.
Circlip & Groove dimensions
Nominal diameter d1: 34
Thickness s: 1.50
Thickness tolerance: - 0.06
Unstressed diameter d3: 31.5
Lug a: 5.4
Beam b: 3.8
Lug hole d5: 2.5
Groove diameter: 3.800
Groove tolerance: 32.3
Minimum groove width: - 0.25
Radial depth: 1.60
Shoulder length n: 0.85