Dimensions - d (inside diameter) | 7.4mm |
---|---|
Dimensions - B (width) | 0.8mm |
External circlip shaft size 8mm thickness 0.8mm
Circlips are a cost saving alternative to fastening. Such as machined collars on shafts or washer and pin assemblies, still offering the same benefits of a single fastening mechanism by reducing material waste and the number of components.
Circlip & Groove dimensions
Nominal diameter d1: 8
Thickness s: 0.80
Thickness tolerance: - 0.05
Unstressed diameter d3: 7.4
Lug a: 3.2
Beam b: 1.5
Lug hole d5: 1.2
Groove diameter: 0.158
Groove tolerance: 7.6
Minimum groove width: - 0.06
Radial depth: 0.90
Shoulder length n: 0.20