Dimensions - d (inside diameter) | 10mm |
---|---|
Dimensions - D (outside diameter) | 14mm |
Dimensions - B (width) | 10mm |
INA Shell type needle roller bearing with closed end 10mm inside x 14mm outside x 10mm wide
Some designs of drawn cup needle roller bearings are closed at one end. They are thus suitable for closing off the shaft ends of bearing arrangements. This provides protection against injury by rotating shafts and protects the bearing against contamination and moisture.
Depending on the size, the base is either smooth or lock-beaded (stiffened). Due to the profiled base, small axial guidance forces are possible.
Dimensions
Fw: 10mm
D: 14mm
C: 10mm
Basic dynamic load rating (N): 4400
Basic static load rating (N): 5100