- Bearings
- Belts
- Bike Bearings
- Grease
- Kukko
- Linear Bearings
- Loctite
- Oil Seals O Rings Circlips
BK0609 INA Shell Type Needle Roller Bearing with Cloised End 6x10x9mm
Dimensions - d (inside diameter) 6mm Dimensions - D (outside diameter) 10mm Dimensions - B (width) 9mm INA Shell type needle roller bearing with closed end 6mm inside x 10mm outside x 9mm wide
Some designs of drawn cup needle roller bearings are closed at one end. They are thus suitable for closing off the shaft ends of bearing arrangements. This provides protection against injury by rotating shafts and protects the bearing against contamination and moisture.
Depending on the size, the base is either smooth or lock-beaded (stiffened). Due to the profiled base, small axial guidance forces are possible.
Dimensions
Fw: 6mm
D: 10mm
C: 9mm
Basic dynamic load rating (N): 2850
Basic static load rating (N): 2600
INAPrecision products for everything that movesRelated products Similar to BK0609 INA Shell Type Needle Roller Bearing with Cloised End 6x10x9mm
HK4516 INA Drawn Cup Needle Roller Bearing 45x52x16mmINA Drawn cup type needle roller bearing with open end 45mm Inside x 52mm outside x 16mm widePrice Breaks / More Information
HK2512-B INA Drawn Cup Needle Roller Bearing 25x32x12mmINA Drawn cup type needle roller bearing with open end 25mm Inside x 32mm outside x 12mm widePrice Breaks / More Information
HK1412-B INA Drawn Cup Needle Roller Bearing 14x20x12mmINA Drawn cup type needle roller bearing with open end 14mm Inside x 20mm outside x 12mm widePrice Breaks / More Information
HK5022-RS-A-L271 INA Sealed Drawn Cup Needle Roller Bearing 50x58x22mmINA Sealed Drawn cup type needle roller bearing with open end including one rubber seal 50mm Inside x 58mm outside x 22mm widePrice Breaks / More Information
- Belts
