Telephone: +44 (0)1709 527 269
Opening Hours: Monday to Friday (8.30am - 5.00pm)
Search

Reference Code


Search by size

mm
mm
mm

Use metric measurements only. See conversion chart.


Still can't find the part?

If you still can't find the part you need, contact us and we'll do all we can to locate it - just give us a call:
+44 (0)1709 527 269


Browse by category...

Timing Belts

Timing belts are avaiable at Bearing King in single or double sided version, in classical pitches and RPP profiles

Timing / Synchronous Belts

Timing Belts or Synchronous Belts are meant for precision. They are lighter, less expensive and operate more quietly. Timing Belts are synthetic rubber strap that contains cords for strength. It has teeth moulded onto its inner surface to prevent slipping, which fits into the pulley pulley grooves. Timing Belt drive is not considered as a substitute or a replacement to other modes of belt drives.

These Belts exhibit important properties such as fixed speed ratio, no re-tensioning after installation, low maintenance with wide variety of power transmission capacities and drive speeds.

Timing Belts use teeth that mesh with grooves in a pulley to drive the system in synchronous manner. There is no slippage, which will cause speed Variations, allowing drives to be timed very accurately. The tensile cord has minimal stretch, so the constant need for take-up adjustmnent is eliminated.

Timing drives work over a very wide range of speed and torques. Torque range varies from very light duty office equipment to heavy duty crushing equipment up to several hundred kW.

Timing Belts enables it to be used in positive drive resulting in precise movement of drive components.

They are offered in three different teeth profiles
Classical Timing Belts
High Torque Drive (HTD) Belts
Super Torque Drive (STD) Belts

The Classical Timing Belt has trapezoidal teeth profile, HTD has curvilinear or spherical teeth profile and STD has modified curvilinear teeth profile.

Due to difference in teeth profiles as well as in their torque transmitting capability, these belts cannot be interchanged.

HTD Timing Belts are used in application where high torque is to be transmitted from one shaft to another and classical timing belts for precise displacement with relatively light duty application.

STD profile is used in application where high torque is to be transmitted with precision indexing.

Temperature range -25 to +80 degrees

PIX TorquePlus XT2 14M Section Timing Belts

PIX TorquePlus XT2 14M Section Timing Belts

PIX TorquePlus XT2 is an excellent solution for high power applications and can offer new application opportunities as an alternative to other systems like gear & chains, 14M Section 14.00mm pitch, 10.00mm thickness, 6.25mm tooth height
See all PIX TorquePlus XT2 14M Section Timing Belts

PIX TorquePlus XT2 5M Section Timing Belts

PIX TorquePlus XT2 5M Section Timing Belts

PIX TorquePlus XT2 is an excellent solution for high power applications and can offer new application opportunities as an alternative to other systems like gear & chains, 5M Section 5.00mm pitch, 3.80mm thickness, 2.06mm tooth height
See all PIX TorquePlus XT2 5M Section Timing Belts

PIX TorquePlus XT2 8M Section Timing Belts

PIX TorquePlus XT2 8M Section Timing Belts

PIX TorquePlus XT2 is an excellent solution for high power applications and can offer new application opportunities as an alternative to other systems like gear & chains, 8M Section 8.00mm pitch, 6.00mm thickness, 3.48mm tooth height
See all PIX TorquePlus XT2 8M Section Timing Belts

PIX X'act 14M Section Classical Timing Belts

PIX X'act 14M Section Classical Timing Belts

PIX X'act Classical Timing Belts 14M Section 14.00mm pitch, 10.00mm thickness, 6.25mm tooth height
See all PIX X'act 14M Section Classical Timing Belts

PIX X'act 5M Section Classical Timing Belts

PIX X'act 5M Section Classical Timing Belts

PIX X'act Classical Timing Belts 5M Section 5.00mm pitch, 3.80mm thickness, 2.06mm tooth height
See all PIX X'act 5M Section Classical Timing Belts

PIX X'act 8M Section Classical Timing Belts

PIX X'act 8M Section Classical Timing Belts

PIX X'act Classical Timing Belts 8M Section 8.00mm pitch, 6.00mm thickness, 3.48mm tooth height
See all PIX X'act 8M Section Classical Timing Belts

PIX X'act H Section Classical Timing Belts

PIX X'act H Section Classical Timing Belts

PIX X'act Classical Timing Belts H Section 12.7mm (1/2") pitch, 4.30mm thickness, 2.29mm tooth height
See all PIX X'act H Section Classical Timing Belts

PIX X'act L Section Classical Timing Belts

PIX X'act L Section Classical Timing Belts

PIX X'act Classical Timing Belts L Section 9.525mm (3/8") pitch, 3.60mm thickness, 1.91mm tooth height
See all PIX X'act L Section Classical Timing Belts

PIX X'act XL Section Classical Timing Belts

PIX X'act XL Section Classical Timing Belts

PIX X'act Classical Timing Belts XL Section 5.080mm (1/5") pitch, 2.30mm thickness, 1.27mm tooth height
See all PIX X'act XL Section Classical Timing Belts

Translate this page
FrançaisFrançais   EspañolEspañol   DeutschDeutsch   ItalianoItaliano   NederlandsNederlands
GBP EUR USD
Currency: GBP
Free UK Shipping German Pulling Tools Deep Groove Bearings Credit Application Form

Read our Privacy Policy Your access to and use of this Website is conditional on your acceptance of these Terms and Conditions of Use (H)
© Bearing King 2019, Unit 5, Stonerow Way, Parkgate, Rotherham, S60 1SG