Dimensions - d (inside diameter) | 40mm |
---|
RHP Cast iron take up unit 40mm bore - Basic Bearing Insert: 1040-40, Casting Group: ST6/MST3
Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.
Shaft diameter: 40mm
RHP designation: ST40
Basic bearing insert: 1040
Casting group: 6
Dimensions (mm)
L: 143.5
L1: 89.2
L2: 15.5
L3: 20.5
L4: 81.5
L5: 50.5
H: 118.0
H1: 82.5
H2: 49.5
H3: 101.0
N: 29.0
A: 49.5
A1: 37.0
A2: 17.50
B: 49.20
B1: 41.20
B2: 43.73
B3: 56.33
s: 19.03
s1: 11.03
s2: 21.43
ISO Load ratings (newtons)
Dynamic: 32500
Static: 19900
Rec max speed: 4000 rev/min
Mass: 2.7 kg