Find with reference code or description
Or search by measurements (mm)
FREE UK MAINLAND DELIVERY ON ORDERS OVER £100
Bearing King RCK70 RCK70-32x60 Challenge Cone Clamping Element 32x60mm

RCK70-32x60 Challenge Cone Clamping Element 32x60mm

Challenge
RCK70-32x60 Challenge Cone Clamping Element 32x60mm
RCK70-32x60 Challenge Cone Clamping Element 32x60mm
In Stock
Challenge RCK70 series cone clamping element 32mm inside x 60mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0
£14.58 INC.VAT
£12.15 EXC.VAT
Dimensions - d (inside diameter)32mm

Challenge RCK70 series cone clamping element 32mm inside x 60mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0

Shaftlock Cone Clamping Elements

RCK70 Cone clamping elements are designed to give optimum concentricity, both radically and axially. Similar in design to the RCK13, but with increased length to provide improved support, and reduced pressures on both shaft and hub. These units must always be installed inside the hub to ensure optimum concentricity. Axial movement of hub will occur during clamping operation.

Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force.

There are two main advantages of cone clamps. The first is that for machining your component (i.e. a sprocket), the bore needs to be plain rather than being keyed or tapped and tapered. The second advantage is that the cone clamp acts as an overload protector, with excessive loading causing the clamp to spin on the shaft.

Cross Reference Guide:- Tollok: TLK130, Bikon: 1003/7000A, Bonfix: CCE4000, Chiaravalli: RCK70, Compomac: Conex D, Fenlock: FLK130, Italblock: CN54/N, Kana: N/A, Kinlok: LOK20A, Clampex KTR: KTR200, MAV: 6901, Poggi: CAL-D, Ringblok: 1300.1, Ringfeder: RFN7013.0, Ringspann: RLK130, SIT: Type 5A, TAS-Schafer: N/A, Tsubaki Power-Lock: N/A, VBlok: VK700

To Install
1 Ensure the hub and shaft surfaces are clean and degreased.
2 Apply a thin coating of light machine oil to screw threads and conical surfaces (do not use any molybdenum disulphide based or E.P. oils).
3 Loosely assemble the clamping element into the required position and tighten the clamping screws in diagonal sequence to the requisite torque, Ts.
4 If the application is subject to corrosive environmental conditions, apply grease to protect screw heads etc.

To Remove
1 Loosen all of the clamping screws in the same diagonal sequence as assembly.
2 The clamping element should now self release.
3 If necessary, tap the screws lightly with a soft hammer.
4 If the clamping element tapers still don't release, remove some of the bolts and insert them into threaded removal holes.
5 Tighten them sequentially to break the clamping ring cone tapers.
6 Lubricate all screws with a light machine oil for the future use of the Challenge Cone Clamping Element.

Dimensions
d: 32mm
D: 60mm
L1: 26mm
L2: 31mm
L3: 39mm
L: 45mm

Transmission
Torque Mt: 1116Nm
Axial Force Ft: 65kN

Contact Pressure
Shaft P: 229 N/mm2
Hub P1: 122 N/mm2

Locking Screws
Qty: 8
Size: M6x25
Tightening Torque Ts: 17Nm

RCK70-32x60 Challenge Cone Clamping Element 32x60mm image 2

ChallengeNever a Problem Always Challenge

Related products Similar to RCK70-32x60 Challenge Cone Clamping Element 32x60mm

RCK70-48x80 Challenge Cone Clamping Element 48x80mm
Challenge
RCK70-48x80 Challenge Cone Clamping Element 48x80mm
Challenge RCK70 series cone clamping element 48mm inside x 80mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0
Price Breaks / More Information
RCK70-25x50 Challenge Cone Clamping Element 25x50mm
Challenge
RCK70-25x50 Challenge Cone Clamping Element 25x50mm
Challenge RCK70 series cone clamping element 25mm inside x 50mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0
Price Breaks / More Information
RCK70-60x90 Challenge Cone Clamping Element 60x90mm
Challenge
RCK70-60x90 Challenge Cone Clamping Element 60x90mm
Challenge RCK70 series cone clamping element 60mm inside x 90mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0
Price Breaks / More Information
RCK70-38x65 Challenge Cone Clamping Element 38x65mm
Challenge
RCK70-38x65 Challenge Cone Clamping Element 38x65mm
Challenge RCK70 series cone clamping element 38mm inside x 65mm outside, also known as series RF04, TLK130, CCE4000, Conex D, FLK130, CN54/N, LOK20A, RFN7013.0
Price Breaks / More Information