Find with reference code or description
Or search by measurements (mm)
FREE UK MAINLAND DELIVERY ON ORDERS OVER £100
Bearing King RCK16 RCK16- 38x65 Challenge Cone Clamping Element 38x65mm

RCK16- 38x65 Challenge Cone Clamping Element 38x65mm

Challenge
RCK16- 38x65 Challenge Cone Clamping Element 38x65mm
RCK16- 38x65 Challenge Cone Clamping Element 38x65mm
In Stock
Challenge RCK16 series cone clamping element 38mm inside x 65mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1
£15.54 INC.VAT
£12.95 EXC.VAT
Dimensions - d (inside diameter)38mm

Challenge RCK16 series cone clamping element 38mm inside x 65mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1

Shaftlock Cone Clamping Elements

Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force.

There are two main advantages of cone clamps. The first is that for machining your component (i.e. a sprocket), the bore needs to be plain rather than being keyed or tapped and tapered. The second advantage is that the cone clamp acts as an overload protector, with excessive loading causing the clamp to spin on the shaft.

Cross Reference Guide:- Tollok: TLK133, Bikon: 1006, Bonfix: CCE4600, Chiaravalli: RCK16, Compomac: Conex ES, Fenlock: FLK133, Italblock: CN9/4, Kana: 201, Kinlok: N/A, Clampex KTR: KTR206, MAV: 1061, Poggi: CAL-ES, Ringblok: 1720, Ringfeder: RFN7013.1, Ringspann: RLK133, SIT: N/A, TAS-Schafer: TAS 3006, Tsubaki Power-Lock: N/A, VBlok: VK130

To Install
1 Ensure the hub and shaft surfaces are clean and degreased.
2 Apply a thin coating of light machine oil to screw threads and conical surfaces (do not use any molybdenum disulphide based or E.P. oils).
3 Loosely assemble the clamping element into the required position and tighten the clamping screws in diagonal sequence to the requisite torque, Ts.
4 If the application is subject to corrosive environmental conditions, apply grease to protect screw heads etc.

To Remove
1 Loosen all of the clamping screws in the same diagonal sequence as assembly.
2 The clamping element should now self release.
3 If necessary, tap the screws lightly with a soft hammer.
4 If the clamping element tapers still don't release, remove some of the bolts and insert them into threaded removal holes.
5 Tighten them sequentially to break the clamping ring cone tapers.
6 Lubricate all screws with a light machine oil for the future use of the Challenge Cone Clamping Element.

Dimensions
d: 38mm
D: 65mm
D1: 74mm
L1: 17mm
L2: 22mm
L3: 28mm
L: 34mm

Transmission
Torque Mt: 780Nm
Axial Force Ft: 38kN

Contact Pressure
Shaft P: 174 N/mm2
Hub P1: 101 N/mm2

Locking Screws
Qty: 8
Size: M6x20
Tightening Torque Ts: 17Nm

RCK16- 38x65 Challenge Cone Clamping Element 38x65mm image 2

ChallengeNever a Problem Always Challenge

Related products Similar to RCK16- 38x65 Challenge Cone Clamping Element 38x65mm

RCK16- 70x110 Challenge Cone Clamping Element 70x110mm
Challenge
RCK16- 70x110 Challenge Cone Clamping Element 70x110mm
Challenge RCK16 series cone clamping element 70mm inside x 110mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1
Price Breaks / More Information
RCK16- 180x235 Challenge Cone Clamping Element 180x235mm
Challenge
RCK16- 180x235 Challenge Cone Clamping Element 180x235mm
Challenge RCK16 series cone clamping element 180mm inside x 235mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1
Price Breaks / More Information
RCK16- 120x165 Challenge Cone Clamping Element 120x165mm
Challenge
RCK16- 120x165 Challenge Cone Clamping Element 120x165mm
Challenge RCK16 series cone clamping element 120mm inside x 165mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1
Price Breaks / More Information
RCK16- 32x60 Challenge Cone Clamping Element 32x60mm
Challenge
RCK16- 32x60 Challenge Cone Clamping Element 32x60mm
Challenge RCK16 series cone clamping element 32mm inside x 60mm outside, also known as series RF07, TLK133, CCE4600, Conex ES, FLK133, CN9/4, RFN7013.1
Price Breaks / More Information