Find with reference code or description
Or search by measurements (mm)
FREE UK MAINLAND DELIVERY ON ORDERS OVER £100
Bearing King RCK11 RCK11-60x90 Challenge Cone Clamping Element 60x90mm

RCK11-60x90 Challenge Cone Clamping Element 60x90mm

Challenge
RCK11-60x90 Challenge Cone Clamping Element 60x90mm
RCK11-60x90 Challenge Cone Clamping Element 60x90mm
In Stock
Challenge RCK11 series cone clamping element 60mm inside x 90mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0
£62.86 INC.VAT
£52.38 EXC.VAT
Dimensions - d (inside diameter)60mm
Dimensions - D (outside diameter)90mm

Challenge RCK11 series cone clamping element 60mm inside x 90mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0

Shaftlock Cone Clamping Elements

Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force.

There are two main advantages of cone clamps. The first is that for machining your component (i.e. a sprocket), the bore needs to be plain rather than being keyed or tapped and tapered. The second advantage is that the cone clamp acts as an overload protector, with excessive loading causing the clamp to spin on the shaft.

RCK11 Suitable for assemblies where special, even heavy-duty conditions are required, achieving maximum friction clamping results. It incorporates the best features of all the models which have been presented. It operates with very high torque values.

Cross Reference Guide:- Tollok: TLK450, Bikon: 1012, Bonfix: N/A, Chiaravalli: RCK11, Compomac: Conex F, Fenlock: FLK450, Italblock: N/A, Kana: N/A, Kinlok: N/A, Clampex KTR: KTR400, MAV: 1008, Poggi: N/A, Ringblok: 1800, Ringfeder: RFN7015.0, Ringspann: RLK 400 Series, SIT: N/A, TAS-Schafer: 3012, Tsubaki Power-Lock: AD, VBlok: VK112

To Install
1 Ensure the hub and shaft surfaces are clean and degreased.
2 Apply a thin coating of light machine oil to screw threads and conical surfaces (do not use any molybdenum disulphide based or E.P. oils.
3 Align all of the component slots and loosely assemble the clamping element into the required position.
4 Tighten the clamping screws in diagonal sequence to the requisite torque, Ts.
5 If the application is subject to corrosive environmental conditions, apply grease to protect screw heads etc.

To Remove
1 Loosen all of the clamping screws in the same diagonal sequence as assembly.
2 Remove some bolts and insert them into the threaded hole that passes through the front clamping element cone and the centre section plate to reach the surface of the rear cone.
3 Tighten the screws sequentially to release the rear cone.
4 Remove some bolts and insert them into the threaded hole in the front cone so that they reach the centre section plate.
5 Tighten the screws sequentially to release the front cone.
6 Lubricate all screws with a light machine oil for the future use of the Challenge Cone Clamping Element.

Dimensions
d: 60mm
D: 90mm
L: 72mm
L2: 64mm
L1: 56mm

Transmission
Torque Mt: 5780Nm
Axial Force Ft: 178kN

Contact Pressure
Shaft P:199 N/mm2
Hub P1: 104 N/mm2

Locking Screws
Qty: 10
Size: M8x55
Tightening Torque Ts: 41Nm

RCK11-60x90 Challenge Cone Clamping Element 60x90mm image 2

ChallengeNever a Problem Always Challenge

Related products Similar to RCK11-60x90 Challenge Cone Clamping Element 60x90mm

RCK11-75x115 Challenge Cone Clamping Element 75x115mm
Challenge
RCK11-75x115 Challenge Cone Clamping Element 75x115mm
Challenge RCK11 series cone clamping element 75mm inside x 115mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0
Price Breaks / More Information
RCK11-80x120 Challenge Cone Clamping Element 80x120mm
Challenge
RCK11-80x120 Challenge Cone Clamping Element 80x120mm
Challenge RCK11 series cone clamping element 80mm inside x 120mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0
Price Breaks / More Information
RCK11-40x75 Challenge Cone Clamping Element 40x75mm
Challenge
RCK11-40x75 Challenge Cone Clamping Element 40x75mm
Challenge RCK11 series cone clamping element 40mm inside x 75mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0
Price Breaks / More Information
RCK11-45x75 Challenge Cone Clamping Element 45x75mm
Challenge
RCK11-45x75 Challenge Cone Clamping Element 45x75mm
Challenge RCK11 series cone clamping element 45mm inside x 75mm outside, also known as series RF19, TLK400, CCE9500, Conex F, FLK400, CN911, LOK40/LOK70, RFN7015.0
Price Breaks / More Information