Dimensions - d (inside diameter) | 63.5mm |
---|
RHP Cast iron take up unit 2.1/2 inch bore - Basic Bearing Insert: 1065-2.1/2, Casting Group: ST11/MST8
Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.
Shaft diameter: 2.1/2 inch
RHP designation: MST2.1/2
Basic bearing insert: 1065
Casting group: 8
Dimensions (mm)
L: 222.5
L1: 137.5
L2: 21.5
L3: 32.0
L4: 120.5
L5: 77.0
H: 166.5
H1: 113.0
H2: 70.0
H3: 150.8
N: 42.0
A: 70.0
A1: 50.5
A2: 27.00
B: 74.60
s: 30.24
ISO Load ratings (newtons)
Dynamic: 61000
Static: 45000
Rec max speed: 2450 rev/min
Mass: 7.9 kg