MR24371 LLB Enduro Sealed Radial Bottom Bracket Bearing for Trek BB90 Abec 3 - 24x37.1x7mm

View all Enduro Bearings

View all Bottom Bracket Bearings

Original Enduro single row ball sealed bottom bracket bearing for Trek BB90 where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing (MR2437) 24mm inside x 37.1mm outside x 7mm width

MR 24371 LLB-E - ABEC-3, Radial Bottom Bracket Bearing for Trek BB90 and SRAM GXP and Shimano 24mm cranksets - 24mm x 37.1mm x 7mm -

ABEC-3 Radial Bottom Bracket Bearing featuring 52100 High-Carbon chromium alloy races paired with grade 10 Balls with 90% fill, high-pressure, water-proof grease.

This is a unique custom bearing that is not used a lot, but when you need it, its a major problem solver.

Trek BB90 bottom brackets require the bearing to be directly pressed into the BB shell that is often made from material that is softer than steel, and over time quite often the bearing seat can become slightly oversized from use. These replacement bearings have been made just slightly oversized (0.1mm) to compensate. This version features a 24mm ID used for Shimano 24mm cranksets and SRAM GXP non-drive-side installation. For drive-side SRAM GXP cranks we also make MR22371 for the same oversized BB90 issue.

The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

Static load - 726lbf / 3.22kN
Weight - 31.1g

EnduroThe world's No1 Bike Bearings