Dimensions - d (inside diameter) | 34.93mm |
---|---|
Dimensions - D (outside diameter) | 76.2mm |
Dimensions - B (width) | 16.67mm |
RHP Single row angular contact ball bearing with brass cage 1.3/8 inch inside x 3 inch outside x 21/32 inch wide
RHP Single row angular contact ball bearings can accommodate axial loads in one direction only. A single row bearing is typically adjusted against a second bearing. The bearings are non-separable and the bearing rings have one high and one low shoulder. The low shoulder enables a large number of balls to be incorporated in the bearing, giving it a relatively high load carrying capacity.
Boundry dimensions (inch)
d: 1.3/8
D: 3
B: 21/32
Basic load ratings (N)
Dynamic: 37 000
Static: 24 200
Limiting speeds (min)
Grease: 4 900
Oil: 9 800
Mass (kg)
0,408