Drawn cup type needle roller bearing with open end 40mm Inside x 47mm outside x 20mm wide
Due to the thin-walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit. If axial means of location such as shoulders, snap rings etc. are not used, the housing bore can be produced easily and particularly economically.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings.
|Dimensions - d (inside diameter)||40mm|
|Dimensions - D (outside diameter)||47mm|
|Dimensions - B (width)||20mm|
Bearing King offer a full range of Budget Brand products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery