Dimensions - d (inside diameter) | 20mm |
---|---|
Dimensions - D (outside diameter) | 26mm |
Dimensions - B (width) | 30mm |
INA Drawn cup type needle roller bearing with open end 20mm Inside x 26mm outside x 30mm wide
Due to the thin-walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit. If axial means of location such as shoulders, snap rings etc. are not used, the housing bore can be produced easily and particularly economically.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings.
Dimensions
Fw: 20mm
D: 26mm
C: 30mm
r min: 0.8mm
Basic load ratings dynamic: 20.9kn
Basic load ratings static: 40.5kn
Fatigue load limit: 4.75kn
Speed ratings reference speed: 12000r/min
Speed ratings Limiting speed: 14000r/min
Mass: 0.035kg