Sealed Drawn cup type needle roller bearing with open end including two rubber seals 16mm Inside x 22mm outside x 16mm wide
SKF Drawn cup needle roller bearings with open ends and with closed ends are complete units comprising thin-walled, drawn cup outer rings and needle roller and cage assemblies. Drawn cup needle roller bearings are also available in a full complement design.
Due to the thin-walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit. If axial means of location such as shoulders, snap rings etc. are not used, the housing bore can be produced easily and particularly economically.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings.
The lip seals are an extremely cost-effective solution to exclude solid contaminants and moisture and to retain the lubricant in the bearing.
Suitable inner rings (to be ordered separately): - IR12X16X20
r1,2 min: 0.8mm
Basic load ratings dynamic: 7.37kn
Basic load ratings static: 9.8kn
Fatigue load limit: 1.12kn
Speed ratings reference speed: - r/min
Speed ratings Limiting speed: 9000 r/min
|Dimensions - d (inside diameter)||16mm|
|Dimensions - D (outside diameter)||22mm|
|Dimensions - B (width)||16mm|
Here at Bearing King we offer the full range of SKF products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery