- Bearings
- Belts
- Bike Bearings
- Grease
- Kukko
- Linear Bearings
- Loctite
- Oil Seals O Rings Circlips
HK1210-B INA Drawn Cup Needle Roller Bearing 12x16x10mm
Dimensions - d (inside diameter) 12mm Dimensions - D (outside diameter) 16mm Dimensions - B (width) 10mm INA Drawn cup type needle roller bearing with open end 12mm Inside x 16mm outside x 10mm wide
Due to the thin walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings IR or LR.
Dimensions
Fw: 12mm
D: 16mm
C: 10mm
Basic load ratings
Dynamic: 4950 N
Static: 6200 N
Fatigue load limit: 800 N
Limiting speed: 20 000
Reference speed: 14 800
Suitable inner rings (to be ordered separately): - LR8X12X10.5 or IR8X12X10.5
Mass: 4.6g
INAPrecision products for everything that movesRelated products Similar to HK1210-B INA Drawn Cup Needle Roller Bearing 12x16x10mm
BK0408 INA Shell Type Needle Roller Bearing with Cloised End 4x8x8mmINA Shell type needle roller bearing with closed end 4mm inside x 8mm outside x 8mm widePrice Breaks / More Information
HK2538-ZW INA Drawn Cup Needle Roller Bearing 25x32x38mmINA Drawn cup type needle roller bearing with open end 25mm Inside x 32mm outside x 38mm widePrice Breaks / More Information
HK1512-B INA Drawn Cup Needle Roller Bearing 15x21x12mmINA Drawn cup type needle roller bearing with open end 15mm Inside x 21mm outside x 12mm widePrice Breaks / More Information
HK3020-2RS-L271 INA Sealed Drawn Cup Needle Roller Bearing 30x37x20mmINA Sealed Drawn cup type needle roller bearing with open end including two rubber seals 30mm Inside x 37mm outside x 20mm widePrice Breaks / More Information
- Belts
