- Bearings
- Belts
- Bike Bearings
- Grease
- Kukko
- Linear Bearings
- Loctite
- Oil Seals O Rings Circlips
HK1012-RS-FPM-B-L271 INA Sealed Drawn Cup Needle Roller Bearing 10x14x12mm
HK1012-RS-FPM-B-L271 INA Sealed Drawn Cup Needle Roller Bearing 10x14x12mmIn StockINA Sealed Drawn cup type needle roller bearing with open end including one rubber seal 10mm Inside x 14mm outside x 12mm wide, also known as HK1012RSQuantityPrice Per Unit10+£4.08 each25+£3.98 each50+£3.86 eachDimensions - d (inside diameter) 10mm Dimensions - D (outside diameter) 14mm Dimensions - B (width) 12mm INA Sealed Drawn cup type needle roller bearing with open end including one rubber seal 10mm Inside x 14mm outside x 12mm wide, also known as HK1012RS
Due to the thin walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings IR or LR.
The lip seals give protection against contamination, spray water and the loss of lubricant. Sealed bearings are greased with lithium complex soap grease to GA08.
Dimensions
Fw: 10mm
D: 14mm
C: 12mm
Basic load ratings
Dynamic: 4400 N
Static: 5100 N
Fatigue load limit: 650 N
Limiting speed: 17 000
Suitable inner rings (to be ordered separately): -
Mass: 4.2g
INAPrecision products for everything that movesRelated products Similar to HK1012-RS-FPM-B-L271 INA Sealed Drawn Cup Needle Roller Bearing 10x14x12mm
HK0709-B INA Drawn Cup Needle Roller Bearing 7x11x9mmINA Drawn cup type needle roller bearing with open end 7mm Inside x 11mm outside x 9mm widePrice Breaks / More Information
HK2526 INA Drawn Cup Needle Roller Bearing 25x32x26mmINA Drawn cup type needle roller bearing with open end 25mm Inside x 32mm outside x 26mm widePrice Breaks / More Information
HK3018-RS INA Sealed Drawn Cup Needle Roller Bearing 30x37x18mmINA Sealed Drawn cup type needle roller bearing with open end including one rubber seal 30mm Inside x 37mm outside x 18mm widePrice Breaks / More Information
HK0812-2RS-FPM-DK-B-L178 INA Sealed Drawn Cup Needle Roller Bearing 8x12x12mmINA Sealed Drawn cup type needle roller bearing with open end including two rubber seals 8mm Inside x 12mm outside x 12mm wide, also known as HK08122RSPrice Breaks / More Information
- Belts
