|Dimensions - d (inside diameter)||9mm|
|Dimensions - D (outside diameter)||13mm|
|Dimensions - B (width)||10mm|
INA Drawn cup type needle roller bearing with open end 9mm Inside x 13mm outside x 10mm wide
Due to the thin walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings IR or LR.
Basic load ratings
Dynamic: 4250 N
Static: 4650 N
Fatigue load limit: 600 N
Limiting speed: 25 500
Reference speed: 19 000
Suitable inner rings (to be ordered separately): -