INA Sealed Drawn cup type needle roller bearing with open end including two rubber seals 8mm Inside x 12mm outside x 12mm wide, also known as HK08122RS
Due to the thin walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings IR or LR.
The lip seals give protection against contamination, spray water and the loss of lubricant. Sealed bearings are greased with lithium complex soap grease to GA08.
Basic load ratings
Dynamic: 2750 N
Static: 2600 N
Fatigue load limit: 290 N
Limiting speed: 20 000
Suitable inner rings (to be ordered separately): -
|Dimensions - d (inside diameter)||8mm|
|Dimensions - D (outside diameter)||12mm|
|Dimensions - B (width)||12mm|
Precision products for everything that moves