If you still can't find the part you need, contact us and we'll do all we can to locate it - just give us a call:
+44 (0)1709 527 269
INA Drawn cup type needle roller bearing with open end 8mm Inside x 12mm outside x 8mm wide
Due to the thin walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings IR or LR.
Dimensions
Fw: 8mm
D: 12mm
C: 8mm
Basic load ratings
Dynamic: 2750 N
Static: 2600 N
Fatigue load limit: 290 N
Limiting speed: 28 000
Reference speed: 21 800
Suitable inner rings (to be ordered separately): -
Mass: 2.7g
| Dimensions - d (inside diameter) | 8mm |
|---|---|
| Dimensions - D (outside diameter) | 12mm |
| Dimensions - B (width) | 8mm |
Bulk Order or Trade Enquiry? Contact us or give us a call on +44 (0)1709 527 269
Français
Español
Deutsch
Italiano
Nederlands
