Find with reference code or description
Or search by measurements (mm)
Bearing King SKF Speedi Sleeves CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm

CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm

SKF
CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm
CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm
In Stock
SKF Metric shaft repair sleeve for shafts 58.65mm - 58.80mm
£28.30
£33.96 INC. VAT
Dimensions - d (inside diameter)58.80mm

SKF Metric shaft repair sleeve for shafts 58.65mm - 58.80mm

This thin-walled sleeve 0,28 mm (0.011 in.), developed by SKF, is simply pushed in position over the worn area, providing a counterface surface that is optimized for radial shaft seals.

There is no shaft disassembly or machining involved and costly downtime is minimized. Since the same sized seal as the original can be used, there is no need to search for other seals, or keep a stock of different sizes.

No special equipment is required since the installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that is needed for the installation.

There is no shaft disassembly or machining involved and costly downtime is minimized. Since the same sized seal as the original can be used, there is no need to search for other seals, or keep a stock of different sizes.
No special equipment is required since the installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that is needed for the installation.

Shaft repair sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. Shaft repair sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. Shaft repair sleeves low profile design means that the same size seal can be utilised and multi-lip oil seals can be accommodated.

Product Information
Shaft Diameter Range: 58,65 - 58,80mm

Nominal Dimensions (mm)
d1: 58,75
D+1,6: 68,28
b1+0,8: 19,84
b+0,8: 23,83
B1: 34,93

CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm image 2

SKFHere at Bearing King we offer the full range of SKF products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery

Related products Similar to CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm

Related categories Similar to CR99231 SKF Stainless Speedi Sleeve for Shafts 58.65-58.80mm


Translate this page

FrançaisFrançais
EspañolEspañol
DeutschDeutsch
ItalianoItaliano
NederlandsNederlands