7206BECBP SKF Single Row Angular Contact Bearing 30x62x16mm

View all SKF Angular contact Ball Bearings

SKF Single row universal matching angular contact bearing with 40 degree contact angle

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

High-speed capability
Accommodate relatively high radial loads and large unilateral axial loads

Dimensions
d 30 mm Bore diameter
D 62 mm Outside diameter
B 16 mm Width
d1 ? 42.65 mm Shoulder diameter of inner ring (large side face)
d2 ? 36.13 mm Shoulder diameter of inner ring (small side face)
D1 ? 50.1 mm Shoulder diameter of outer ring (large side face)
a 27.3 mm Distance side face to pressure point
r1,2 min. 1 mm Chamfer dimension
r3,4 min. 0.6 mm Chamfer dimension

Abutment dimensions
da min.35.6 mm Diameter of shaft abutmentDa
max.56.4 mm Abutment diameter housing
Db max.57.8 mm Diameter of housing abutment
ra max.1 mm Radius of fillet
rb max.0.6 mm Radius of fillet

Calculation data
Basic dynamic load rating C 24 kN
Basic static load rating C0 15.6 kN
Fatigue load limit Pu 0.655 kN
Reference speed 13 000 r/min
Limiting speed 14 000 r/min
Minimum axial load factor A 0.00377
Minimum radial load factor kr 0.095
Limiting value e 1.14

SINGLE BEARING OR BEARING PAIR ARRANGED IN TANDEM
Calculation factor (single, tandem) X 0.35
Calculation factor (single, tandem) Y0 0.26
Calculation factor (single, tandem) Y2 0.57

BEARING PAIR ARRANGED BACK-TO-BACK OR FACE-TO-FACE
Calculation factor (back-to-back, face-to-face) X 0.57
Calculation factor (back-to-back, face-to-face) Y0 0.52
Calculation factor (back-to-back, face-to-face) Y1 0.55
Calculation factor (back-to-back, face-to-face) Y2 0.93

Mass
Mass 0.2 kg

Properties
Contact type Normal contact
(two-point contact)
Number of rows 1
Locating feature, bearing outer ring None
Ring type One-piece inner and outer rings
Cage Non-metallic
Matched arrangement No
Universal matching bearing Yes
Axial internal clearance Not applicable
Matched condition (axial clearance/ preload)
Axial clearance CB
Material, bearing Bearing steel
Coating Without
Sealing Without
Lubricant None

SKFHere at Bearing King we offer the full range of SKF products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery