If you still can't find the part you need, contact us and we'll do all we can to locate it - just give us a call:
+44 (0)1709 527 269
Budget Brand stainless steel Single row deep groove ball bearing with two rubber seals and circlip groove and circlip 17mm inside x 35mm outside x 10mm width, also known as 6003LUNR, 6003LLUNR, 6003DUNR, 6003DDUNR, 6003RSNR
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Principal Dimensions
Inside diameter: 17mm
Outside diameter: 35mm
Width: 10mm
| Dimensions - d (inside diameter) | 17mm |
|---|---|
| Dimensions - D (outside diameter) | 35mm |
| Dimensions - B (width) | 10mm |
Bearing King offer a full range of Budget Brand products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery
Bulk Order or Trade Enquiry? Contact us or give us a call on +44 (0)1709 527 269
Français
Español
Deutsch
Italiano
Nederlands
