For splitting tight or over-twisted nuts without damaging the bolt thread of quality grades 6, for nut sizes 27mm - 36mm or 1.1/8" - 1.7/16".
Hardened chisel cutting edge.
Gently turn the chisel in the other direction by pulling back.
The nut splitter's band provides additional support when turning the chisel back.
Chisel available as a replacement part, time-saving order process thanks to numbering system.
How it works
A unique combination of the chisel with the spindle. This is pressed into the nut through a guide rail for cutting. After splitting the nut, the chisel is easily returned to the starting position.
The splitting chisels of the nut splitters are wearing parts. Blunt, pitted or broken chisels must be replaced immediately.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
KUKKO - The name for pullers