55-0 Kukko Single Edged Mechanical Nut Splitter for Nuts 4-10mm

For splitting tight or over-twisted nuts without damaging the bolt thread of quality grades 6, for nut sizes 4mm - 10mm or 5/32" - 13/32".

Description
Hardened chisel cutting edge.
Gently turn the chisel in the other direction by pulling back.

Advantage
The nut splitter's band provides additional support when turning the chisel back.
Chisel available as a replacement part, time-saving order process thanks to numbering system.

How it works
A unique combination of the chisel with the spindle. This is pressed into the nut through a guide rail for cutting. After splitting the nut, the chisel is easily returned to the starting position.

Safety information
The splitting chisels of the nut splitters are wearing parts. Blunt, pitted or broken chisels must be replaced immediately.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

Related categories for 55-0 Kukko Single Edged Mechanical Nut Splitter for Nuts 4-10mm

• Nut Splitters

Other Nut Splitters similar to 55-0 Kukko Single Edged Mechanical Nut Splitter for Nuts 4-10mm

• 55-3 Kukko Single Edged Mechanical Nut Splitter for Nuts 27-36mm
• 55-2 Kukko Single Edged Mechanical Nut Splitter for Nuts 19-27mm
• 54-3 Kukko Double Edged Mechanic Nut Splitter for Nuts 17-36mm
• 55-1 Kukko Single Edged Mechanical Nut Splitter for Nuts 10-18mm
• 54-2 Kukko Double Edged Mechanic Nut Splitter for Nuts 10-27mm
• View all Nut Splitters

KUKKO

KUKKO - The name for pullers

Bulk Order or Trade Enquiry? Contact us or give us a call on +44 (0)1709 527 269

• How to measure a bearing