Double-edged models exerting twice the normal splitting force on irretrievable nuts in quality classes 5, 6 and 8, for nut sizes 17mm - 36mm or 11/16" - 1.7/16".
Two hardened chisel cutting edges.
Gently turn the chisel in the other direction by pulling back.
One operation through double cutting action.
Splitting nuts can be done without damaging the threaded bolt.
The nut splitter's band provides additional support when turning the chisel back.
Chisel available as a replacement part, time-saving order process thanks to numbering system.
How it works
The nut is cut on both sides by using the motorised and fixed chisels.
A unique combination of the chisel with the spindle. This is pressed into the nut through a guide rail for cutting. After splitting the nut, the chisel is easily returned to the starting position.
The splitting chisels of the nut splitters are wearing parts. Blunt, pitted or broken chisels must be replaced immediately.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
KUKKO - The name for pullers