PIX CT Timing belt 1046.48mm (41.2") 19.05mm (3/4") wide 5.080mm (1/5") pitch 206 teeth
Synchronous belts can best be described as that belt with integrally moulded teeth on its inside which makes positive engagement with axially grooved pulley. Synchronous belt is also known as Timing belts or positive drive belt. Synchronous belt drive is not considered as a substitute or replacement to other modes of belt drives. Its unique feature enables it to use in positive drive resulting in precise movement of drive components.
Synchronous belts are offered in three different teeth profile. one is classical timing belt(CT) and second is high torque drive (HTD) and the third is super torque drive (STD) belts. The Classical Synchronous belt has trapezoidal teeth profile and HTD has curvilinear or spherical teeth profile, STD has modified curvilinear tooth profile. Due to difference in teeth profile as well as in their in their torque transmitting capability, these belts can bot be interchanged.
• Trapezoidal tooth profile.
• Low to medium load bearing capacity.
• Fairly good positioning capability as backlash is lesser than HTD belt.
• High flexibility.
• Efficiency up to 98%.
• Automatic vending machines
• Currency counters
• Hosiery Industries
• Electronic meters
• Diamond cutting machines
• Electronic printers / plotters
• Sewing machines
Pitch Length: 41.20 inch 1046.5 mm
No of Teeth: 206
Belt Width: 19.05mm 3/4"
Tooth Pitch: 5.080mm 1/5"
Tooth Height: 1.27mm
Belt Thickness: 2.30mm