Dimensions - d (inside diameter) | 50mm |
---|---|
Dimensions - D (outside diameter) | 110mm |
Dimensions - B (width) | 40mm |
SKF Self aligning ball bearing with polyamide cage & two rubber seals 50mm inside x 110mm outside x 40mm wide, also known as 2310E2RS1TN9, 2310-2RS-TV, 2310-2RS-TVH, 23102RSTN
The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
The design of self-aligning ball bearings is such that angular misalignment between the outer and the inner rings can be accommodated without any negative effect on bearing performance.
Principal dimensions
d: 50mm
D: 110mm
B: 40mm
Basic load ratings
Dynamic: 43,6kn
Static: 14kn
Fatigue load limit
0,72kn
Speed ratings
Limiting speed: 4 000 r/min
Mass: 1,65kg
Dimensions
d2: 62,9m
D1: 95,2mm
R1,2 min: 2mm