Dimensions - d (inside diameter) | 25mm |
---|---|
Dimensions - D (outside diameter) | 62mm |
Dimensions - B (width) | 24mm |
SKF Self aligning ball bearing with polyamide cage, two rubber seals & C3 clearance 25mm inside x 62mm outside x 24mm wide, also known as 2305E2RS1TN9C3, 2305-2RS-TV-C3, 2305-2RS-TVH-C3, 23052RSTNC3
The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
The design of self-aligning ball bearings is such that angular misalignment between the outer and the inner rings can be accommodated without any negative effect on bearing performance.
Principal dimensions
d: 25mm
D: 62mm
B: 24mm
Basic load ratings
Dynamic: 19n
Static: 5,4kn
Fatigue load limit
0,28n
Speed ratings
Limiting speed: 7 500 r/min
Mass: 0,34kg
Dimensions
d2: 32,8mm
D1: 52,7mm
R1,2 min: 1,1mm