Dimensions - d (inside diameter) | 100mm |
---|---|
Dimensions - D (outside diameter) | 180mm |
Dimensions - B (width) | 46mm |
SKF Self aligning ball bearing with brass cage, tapered bore & C3 clearance 100mm inside x 180mm outside x 46mm wide
The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
The design of self-aligning ball bearings is such that angular misalignment between the outer and the inner rings can be accommodated without any negative effect on bearing performance.
Principal dimensions
d: 100mm
D: 180mm
B: 46mm
Basic load ratings
Dynamic: 97,5kn
Static: 40,5kn
Fatigue load limit
1,76kn
Speed ratings
Reference speed: 6 700 r/min
Limiting speed: 4 800 r/min
Mass: 5,00kg
Dimensions
d2: 124mm
D1: 160mm
R1,2 min: 2,1mm