Dimensions - d (inside diameter) | 65mm |
---|---|
Dimensions - D (outside diameter) | 120mm |
Dimensions - B (width) | 31mm |
SKF Self aligning ball bearing with polyamide cage & two rubber seals 65mm inside x 120mm outside x 31mm wide, also known as 2213E2RS1TN9, 2213-2RS-TV, 2213-2RS-TVH
The self-aligning ball bearing was invented by SKF. It has two rows of balls and a common sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.
The design of self-aligning ball bearings is such that angular misalignment between the outer and the inner rings can be accommodated without any negative effect on bearing performance.
Principal dimensions
d: 65mm
D: 120mm
B: 31mm
Basic load ratings
Dynamic: 35,1kn
Static: 14kn
Fatigue load limit
0,72kn
Speed ratings
Limiting speed: 3 600 r/min
Mass: 1,40kg
Dimensions
d2: 79,3mm
D1: 106mm
R1,2 min: 1,5mm