Find with reference code or description
Or search by measurements (mm)
Bearing King Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm

20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm

KUKKO
20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm
20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm
In Stock
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 100mm maximum pulling diameter 120mm
£90.78
£108.94 INC. VAT

For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 100mm maximum pulling diameter 120mm

Description
Thin pulling hook with quick adjusting capability quick adjust.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Mechanical pressure screw.
Milled thread treated with special coating.
Two-arm design for space-saving operation.

Advantage
The thin pulling hooks are suitable for narrow, difficult-to-access locations.
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
Spindle head band prevents the wrench from slipping off.
Cross-beam with hexagonal profile for good grip.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.

How it works
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.

Spare part
614160 Mechanical pressure spindle.
1-93-P 2 narrow, quick adjusting jaws (pair)
20-10-T 2-jaw cross bar

Spare part of
WT-003+S Puller product range - exterior pulling - BASIC+
20-ST+S Sales display for 2-jaw puller with narrow jaws

Part of
WT-003+S Puller product range - exterior pulling - BASIC+
K-2030-10+S Universal 2-jaw and 3-jaw puller set with narrow, quick-adjusting pulling jaws
20-ST+S Sales display for 2-jaw puller with narrow jaws

Accessories
219-1 Clamp for 2-jaw pullers
1-193-P 2 narrow, quick adjusting jaws (pair)
1-253-P 2 narrow, quick adjusting jaws (pair)
1-93-E Jaws, individual

Safety information
The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm image 2

KUKKOKUKKO - The name for pullers

Related products Similar to 20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm

20-20+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 150 x 200mm
KUKKO
20-20+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 150 x 200mm
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 150mm maximum pulling diameter 200mm
Price Breaks / More Information
20-1+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 100 x 90mm
KUKKO
20-1+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 100 x 90mm
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 100mm maximum pulling diameter 90mm
Price Breaks / More Information
20-2 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 150 x 160mm
KUKKO
20-2 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 150 x 160mm
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 150mm maximum pulling diameter 160mm
Price Breaks / More Information
20-30+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 200 x 350mm
KUKKO
20-30+S Kukko Universal 2-Jaw Puller with Narrow Quick Adjusting Jaws 200 x 350mm
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces., leg length 200mm maximum pulling diameter 350mm
Price Breaks / More Information

Related categories Similar to 20-10 Plus S KUKKO Universal 2 Jaw Puller with Narrow Quick Adjusting Jaws 100 x 120mm


Translate this page

FrançaisFrançais
EspañolEspañol
DeutschDeutsch
ItalianoItaliano
NederlandsNederlands