Find with reference code or description
Or search by measurements (mm)
Bearing King Pulling Devices 18-3 Kukko Pulling Device

18-3 Kukko Pulling Device

KUKKO
18-3 Kukko Pulling Device
18-3 Kukko Pulling Device
In Stock
For use with series 17, series 15, series 18-AS and series 18-A. Leg length 144-302mm, leg width 80-300mm
£213.24
£255.89 INC. VAT

For use with series 17, series 15, series 18-AS and series 18-A. Leg length 144-302mm, leg width 80-300mm

Description
For use with series 15 and 17 separators.
The pulling device can be combined with the series 18-0-AS screw adapter to remove parts with threaded holes.
Mechanical pressure screw.
Milled thread treated with special coating.

Advantage
Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.

How it works
The wedge-shaped separator jaws are secured underneath the component to be removed.
For removal, the tension bolts on the pulling device have to be screwed into the separator.
Use the knurled screws to position the cross-beam.
Tightening of the pressure screw and the resulting pressure removes the part from the shaft.

Goes with
15-3 Separators
17-3 Separator with quick clamping pressure spindle

Spare part of
15-C Separating-set
17-C Separating-set with quick clamping pressure spindle

Part of
WT-030 Puller product range - automotive - axle
15-C Separating-set
17-C Separating-set with quick clamping pressure spindle

Accessories
8-02 Long hydraulic spindle
19-3-P 2 extensions for pulling devices (pair)
18-3-AS Set of screw adapters
18-314A Internal Extracting
18-316A Internal Extracting
18-318A Internal Extracting
18-320A Internal Extracting
18-322A Internal Extracting
18-324A Internal Extracting

Safety information
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The separator blades' support surfaces must always sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

18-3 Kukko Pulling Device image 2

KUKKOKUKKO - The name for pullers

Related products Similar to 18-3 Kukko Pulling Device

18-5 Kukko Pulling Device
KUKKO
18-5 Kukko Pulling Device
For use with series 17, series 15, series 18-AS and series 18-A. Leg length 225-400mm, leg width 150-440mm
Price Breaks / More Information
18-4 Kukko Pulling Device
KUKKO
18-4 Kukko Pulling Device
For use with series 17, series 15, series 18-AS and series 18-A. Leg length 134-350mm, leg width 120-380mm
Price Breaks / More Information
18-2 Kukko Pulling Device
KUKKO
18-2 Kukko Pulling Device
For use with series 17, series 15, series 18-AS and series 18-A. Leg length 125-250mm, leg width 60-200mm
Price Breaks / More Information
18-1 Kukko Pulling Device
KUKKO
18-1 Kukko Pulling Device
For use with series 17, series 15, series 18-AS and series 18-A. Leg length 60-150mm, leg width 112-200mm
Price Breaks / More Information

Related categories Similar to 18-3 Kukko Pulling Device


Translate this page

FrançaisFrançais
EspañolEspañol
DeutschDeutsch
ItalianoItaliano
NederlandsNederlands