Telephone: +44 (0)1709 527 269
Opening Hours: Monday to Friday (8.30am - 5.00pm)
Search

Reference Code


Search by size

mm
mm
mm

Use metric measurements only. See conversion chart.


Still can't find the part?

If you still can't find the part you need, contact us and we'll do all we can to locate it - just give us a call:
+44 (0)1709 527 269


Browse by category...

17-3 Kukko Separator With Quick Clamping Pressure Spindle for Pulling 25-155mm

17-3 Kukko Separator With Quick Clamping Pressure Spindle for Pulling 25-155mm
17-3 Kukko In Stock
£257.68£309.22 inc. VATGBP £ | EUR € | USD $
x

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks. Min pulling dia 25mm, max pulling dia 155mm

Description
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
With quick-clamping pressure spindle.
The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
The wedge-shaped separator jaws are secured underneath the component to be removed.
The large supporting surfaces protect the parts to be pulled.

Advantage
Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle.
Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.

Has to be accomplished with
18-3 Pulling device
18-3-B Hydraulic pulling device(including mechanical pressure screw)

How it works
The wedge-shaped separator jaws are secured underneath the component to be removed.
Separate the part by tightening the quick clamping pressure spindle.
The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
For removal, the tension bolts on the pulling device series 18 have to be screwed into the separator.
The part is removed by tightening the spindle against the end of the shaft.

Spare part
621220 Mechanical pressure spindle.
17-3-T Cross-beam
17-3-06 Spindle
017322 Side bolt complete

Part of
17-C Separating-set with quick clamping pressure spindle

Spare part of
17-C Separating-set with quick clamping pressure spindle

Safety information
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The separator blades' support surfaces must always sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

17-3 Kukko Separator With Quick Clamping Pressure Spindle for Pulling 25-155mm image 2

Related categories for 17-3 Kukko Separator With Quick Clamping Pressure Spindle for Pulling 25-155mm

Other Seperator With Quick-Action Pressure Screw similar to 17-3 Kukko Separator With Quick Clamping Pressure Spindle for Pulling 25-155mm

KUKKO

KUKKO

KUKKO - The name for pullers


Bulk Order or Trade Enquiry? Contact us or give us a call on +44 (0)1709 527 269

Translate this page
FrançaisFrançais   EspañolEspañol   DeutschDeutsch   ItalianoItaliano   NederlandsNederlands
GBP EUR USD
Currency: GBP
Free UK Shipping German Pulling Tools Deep Groove Bearings Credit Application Form

Read our Privacy Policy Your access to and use of this Website is conditional on your acceptance of these Terms and Conditions of Use (H)
© Bearing King 2019, Unit 5, Stonerow Way, Parkgate, Rotherham, S60 1SG