Find with reference code or description
Or search by measurements (mm)
Bearing King Kukko Kits 15-C Kukko Separating Set

15-C Kukko Separating Set

KUKKO
15-C Kukko Separating Set
15-C Kukko Separating Set
In Stock
For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.
£481.71
£578.05 INC. VAT

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks.

Description
4-parts, the sets contain one separator, one pulling device and a pair of extensions.
The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
The wedge-shaped separator jaws are secured underneath the component to be removed.
The large supporting surfaces protect the parts to be pulled.
Instructions on the cover.

Advantage
Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
Practical package for universal use.
Complete easy-to-manage package.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kit in the tried-and-tested KUKKO-i-Boxx-System.

Kukko quality standards
Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
A tube of KUKKO special grease included for pressure spindle.

How it works
The wedge-shaped separator jaws are secured underneath the component to be removed.
The separator jaws are clamped by tightening the nuts on the side bolts in equal measure.
The flat surfaces of the separator blades are used to remove sensitive parts without damaging them. The separator blades provide a larger supporting surface to prevent the parts from twisting.
For removal, the tension bolts on the pulling device have to be screwed into the separator.
Note: The clamping depths can be increased using the extensions included in the set.

Safety information
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The separator blades' support surfaces must always sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

15-C Kukko Separating Set image 2

KUKKOKUKKO - The name for pullers

Related products Similar to 15-C Kukko Separating Set

K-2030-10-S-T Kukko Set of Two and Three Arm Pullers with Extremely Narrow Jaws
KUKKO
K-2030-10-S-T Kukko Set of Two and Three Arm Pullers with Extremely Narrow Jaws
For removing gears, bearings, sprockets, synchronizer bodies, etc., in tight or difficult-to-access spaces.
Price Breaks / More Information
69-A Kukko Ball Bearing Extractor Set
KUKKO
69-A Kukko Ball Bearing Extractor Set "Universal" 20-110mm
To remove ball bearings of all types without removing the shaft. to suit the following sizes: 6004-6013; 6201-6206; 6300-6305
Price Breaks / More Information
K-2030-20-S Kukko Set of Two and Three Arm Pullers with Narrow Jaws
KUKKO
K-2030-20-S Kukko Set of Two and Three Arm Pullers with Narrow Jaws
For removing large bearings, gears, discs, etc. for tight or difficult-to-access spaces.
Price Breaks / More Information

Related categories Similar to 15-C Kukko Separating Set


Translate this page

FrançaisFrançais
EspañolEspañol
DeutschDeutsch
ItalianoItaliano
NederlandsNederlands