If you have measured your bearing, enter sizes below:
If you still can't find the bearing you need, contact us and we'll do all we can to locate your bearing - just give us a call:
+44 (0)114 276 7413
I got the AA 105 belt that you sent yesterday for my husbands ride on mower. Thank you very much, terrific service!
Lynn Williams
Click here for more customer commentsSingle row deep groove ball bearing 10mm inside x 26mm outside x 8mm width
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
| Options | Price | Weight | Add bearing to basket |
|---|---|---|---|
| 6000 Budget Brand (Pack of 100) | £65.00 ex. VAT | 1900g |
| Dimensions - d (inside diameter) | 10mm |
|---|---|
| Dimensions - D (outside diameter) | 26mm |
| Dimensions - B (width) | 8mm |

• Read our Privacy Policy • Your access to and use of this Website is conditional on your acceptance of these Terms and Conditions of Use © Bearing King 2012
• Bearing King, Unit F1, G4 Business Centre, Carlisle Street, Sheffield S4 7QN